Shop

As supplied with Optimax masts and Optimax spar sets.

1 x Harken ball bearing hook-in block
1 x Windesign 25 mm low friction ring
1 x Windesign wind indicator PRO
1 x Deck collar with mast sleeve
1 x Nylon sprit adjuster handle
2 x Nylon top pins
1 x Dyneema primary halyard line
1 x Technora / Dyneema secondary halyard line
5 x 2.2 mm tack lines
12 x 1.2 mm double lacing lines

The most popular round type maststep for the Optimist dinghy. This Optimist maststep has an oval cup, which allows the mast to tilt forward when going downwind. Different mast rakes can easily be repeated using the scale on the base. Separately a mast step spring lock can be purchased. The stainless steel spring prevents the nut from turning accidentally. There is no need for additional locking nuts anymore.

Spliced Dyneema® 3 mm vang line with a loop on one end for easy attachment. Tie or splice the open end around the boom.

5 mm Technora® and Dyneema® secondary vang line for ultimate grip in the cleat, durability and ensures extremely good wear resistance characteristics.

Length: 60 cm

These grey sprit ends are suitable for the Optimax MK3 and Optimax MK3 Flex sprits. Sold per pair.

These grey sprit ends are suitable for the Optimax MK3 Hyperflex and Optimax MK4 sprits. Sold per pair.

Optimist halyard system with 3 mm Dyneema with spliced loops and supplied with the Harken hook-in block and 29 mm Harken tie-lite block.

High performance Technora® and Dyneema® halyard with a spliced loop on one end to be fixed easily on the mast cleat. The other end is tapered which makes it thin enough to fit through the halyard handle.

The Optimax Optimist deck collar is made of Delrin to create minimal friction between the sleeve and the collar. The oval inner diameter allows the maximum fore/aft and minimum side play and the tapered inner diameter allows the mast to be raked. 4 countersunk mounting holes. Hole size in deck: 57 mm.

A seperate sleeve is available which is fitted around the mast at deck level and protects the mast from wearing.

High performance Optimist upgrade kit, consisting of outhaul, downhaul and halyard system.

Pro Line Outhaul
3.5 mm HT Polyester outhaul for excellent grip in the cleat.

Pro Line Vang
3 mm spliced Dyneema® primary line with a 5 mm Technora® and Dyneema® secondary line for ultimate grip in the cleat, durability and ensures extremely good wear resistance characteristics. The non-spliced Dyneema® end has enough length to be tied or spliced around the boom.

Pro Line Halyard System
High performance Technora® and Dyneema® halyard with a spliced loop on one end to be fixed easily on the mast cleat. The other end is tapered which makes it thin enough to fit through the halyard handle. This halyard system comes with the OX60R Dyneema replacement halyard with spliced on low friction ring.

A 16 mm black anodized 60 cm aluminium tiller extension for the Optimist. Fitted with EVA foam grip and releasable rubber joint.

Set of rudder fittings for the Optimist. Long and short.

This Optimist buoyancy bag is made of polyurethane coated nylon and is about half the weight and significantly stronger than buoyancy bags made of PVC or PVC coated nylon.

Optimist buoyancy bag with twist lock tube valve.

Color: grey / blue
Content: 48L
Size inflated: 29 cm x 92 cm
Size deflated: 44 cm x 98 cm
Radius: 5 cm

Please note, not to over inflate the Optimist buoyancy bags. When bags are properly filled, they will be soft to the touch. Over inflated bags may burst when heated up by the sun or rising temperatures. Make sure there are no sharp points in your boat that would snag or puncture the buoyancy bags.

Single handed paddle. Can be used with one arm only while steering with the other arm. Weighs only 215 grams.

– Efficient shape permits powerful propulsion
– Can be used on right or left arm
– Comfortable to use
– Weights only 215 grams
– Size: 480 x 133 mm
– Very strong
– Floats