English 
Deutsch 
Français 
Español 
OX25CC – Taquet anodisé en alu noir pour gréement Optimax
Aluminium clamcleat as supplied on all Optimax spars for downhaul and halyard.
Description
Vous aimerez peut-être aussi…
-
PLUS D'INFOSOX25AB3F – Mât Optimist Optimax MK3 Flex
The most flexible and active mast which is designed for lightweight sailors. The MK3 Flex mast for the Optimist is mainly suitable for sailors below 35 kg.
- Superior Lanurep spacecraft alloy
- High grade 45 um hard anodized surface
- Windesign wind indicator PRO
- Pennant holders
- Harken hook-in block
- 3 mm Dyneema primary halyard line with Windesign low friction ring
- Technora / Dyneema secondary halyard line
- Hard anodized aluminium Clamcleat
- Aluminium pin stop
- Sprit adjuster handle
- Low friction end stop
-
PLUS D'INFOSOX25AB4 – Mât Optimist Optimax MK4
The most stiff and powerfull mast, designed for experienced, heavier weight sailors. The MK4 mast for the Optimist is mainly suitable for sailors above 45 kg.
- Superior Lanurep spacecraft alloy
- High grade 45 um hard anodized surface
- Windesign wind indicator PRO
- Pennant holders
- Harken hook-in block
- 3 mm Dyneema primary halyard line with Windesign low friction ring
- Technora / Dyneema secondary halyard line
- Hard anodized aluminium Clamcleat
- Aluminium pin stop
- Sprit adjuster handle
- Low friction end stop
-
PLUS D'INFOSOX25AB3 – Mât Optimist Optimax MK3
This allround racing mast is designed for mid weight sailors and can be matched with all booms and sprits. The MK3 mast for the Optimist is mainly suitable for sailors from 35 to 45 kg.
- Superior Lanurep spacecraft alloy
- High grade 45 um hard anodized surface
- Windesign wind indicator PRO
- Pennant holders
- Harken hook-in block
- 3 mm Dyneema primary halyard line with Windesign low friction ring
- Technora / Dyneema secondary halyard line
- Hard anodized aluminium Clamcleat
- Aluminium pin stop
- Sprit adjuster handle
- Low friction end stop
Produits similaires
-
PLUS D'INFOSOX61CS – Bague d’étambrai basse friction avec collier, grise
The Optimax Optimist deck collar is made of Delrin to create minimal friction between the sleeve and the collar. The oval inner diameter allows the maximum fore/aft and minimum side play and the tapered inner diameter allows the mast to be raked. 4 countersunk mounting holes. Hole size in deck: 57 mm.
The mast sleeve is fitted around the mast at deck level and protects the mast from wearing. Optimist mast sleeve as supplied with Optimax spars.
Mounting the sleeve – you will notice the sleeve is slightly smaller than the mast. To mount the sleeve you should gently warm the sleeve with a hairdryer or paint stripper. You can easily slide the warm sleeve over the mast into position.
-
PLUS D'INFOSOX61C – Bague d’étambrai seule sans collier
The Optimax Optimist deck collar is made of Delrin to create minimal friction between the sleeve and the collar. The oval inner diameter allows the maximum fore/aft and minimum side play and the tapered inner diameter allows the mast to be raked. 4 countersunk mounting holes. Hole size in deck: 57 mm.
A seperate sleeve is available which is fitted around the mast at deck level and protects the mast from wearing.
