English 
Deutsch 
Français 
Español 
OX45M3HF – Optimist Spriet 28 mm Optimax MK3 Hyperflex
The most flexible racing sprit creates less distortion of the sail shape and provides an active change of tension on the leech. For the more experienced sailor who can adjust their mainsheet tension constantly.
- Superior Lanurep spacecraft alloy
- Anodized to a dark grey color
- Grey glass fibre filled Nylon sprit ends
- 15 cm heat shrinkable sprit protection tubing,
prevents wear between mast and sprit
Ähnliche Produkte
-
MEHR INFOOX234M3 – Optimist Rigg komplett Optimax MK3
MK3 spar set for the Optimist. Suitable for sailors from 35 to 45 kg
Material: Superior Lanurep spacecraft alloy
Anodized: Top grade hard dark grey- MK3 mast (OX25AB3)
- MK3 40 mm boom (OX35M3
- MK3 27 mm sprit (OX45M3)
Supplied with rigging pack (OX25):
1 x Harken ball bearing hook-in block
1 x Windesign 25 mm low friction ring
1 x Windesign wind indicator PRO
1 x Deck collar with mast sleeve
1 x Nylon sprit adjuster handle
2 x Nylon top pins
1 x Dyneema primary halyard line
1 x Technora / Dyneema secondary halyard line
5 x 2.2 mm tack lines
12 x 1.2 mm double lacing lines -
MEHR INFOOX25AB3-NP – Optimist Mast Optimax MK3 – ohne Rigg-pack
This allround racing mast is designed for mid weight sailors and can be matched with all booms and sprits. The MK3 mast for the Optimist is mainly suitable for sailors from 35 to 45 kg.
- Superior Lanurep spacecraft alloy
- High grade 45 um hard anodized surface
- Hard anodized aluminium Clamcleat
- Aluminium pin stop
- Low friction end stop
-
MEHR INFOOX25AB4 – Optimist Mast Optimax MK4
The most stiff and powerfull mast, designed for experienced, heavier weight sailors. The MK4 mast for the Optimist is mainly suitable for sailors above 45 kg.
- Superior Lanurep spacecraft alloy
- High grade 45 um hard anodized surface
- Windesign wind indicator PRO
- Pennant holders
- Harken hook-in block
- 3 mm Dyneema primary halyard line with Windesign low friction ring
- Technora / Dyneema secondary halyard line
- Hard anodized aluminium Clamcleat
- Aluminium pin stop
- Sprit adjuster handle
- Low friction end stop
-
MEHR INFOOX35M5 – Optimist Baum 48 mm Optimax MK5
A lightweight yet ultra stiff and powerful 48 mm racing boom which is mainly suitable for the more experienced, heavier weight sailors above 45 kg.
This boom comes with an improved bridle system, an adjusted outhaul cleat position and a colored PRO outhaul trimstrip.
- High grade alloy, dark grey anodized
- Glass fibre filled nylon in- and outboard end fittings
- Glass fibre filled nylon V-shaped outhaul cleat
- Glass fibre filled nylon lacing eyes
- Fitted with the colored PRO outhaul trim strip
- 3.5 mm Polyester outhaul line
- 3 mm Dyneema boom preventer line
- 3 mm Dyneema bridle with two stainless steel rings
- 3 mm Dyneema primary vang line
- 5 mm Dyneema / Technora secondary vang line